pound foot/square second (lb·ft/s²) to poundal (pdl)
pound foot/square second (lb·ft/s²) to poundal (pdl) conversion table
Here are the most common conversions for pound foot/square second (lb·ft/s²) to poundal (pdl) at a glance.
| pound foot/square second (lb·ft/s²) | poundal (pdl) |
|---|---|
| 0.001 | 0.00100000 |
| 0.01 | 0.01000000 |
| 0.1 | 0.10000000 |
| 1 | 1 |
| 2 | 2 |
| 3 | 3 |
| 5 | 5 |
| 10 | 10 |
| 20 | 20 |
| 30 | 30 |
| 50 | 50 |
| 100 | 100 |
| 1000 | 1,000 |
pound foot/square second (lb·ft/s²) to poundal (pdl) conversion guide
pound foot/square second (lb·ft/s²) to poundal (pdl) expresses the same force in a different unit. The direction matters: a value given in pound foot/square second (lb·ft/s²) is multiplied by the source-to-target factor to obtain poundal (pdl). Keep the original measurement and its unit together when copying a result into a calculation.
Conversion formula
Value in poundal (pdl) = value in pound foot/square second (lb·ft/s²) × (1). The factor is approximately 1. Derive it by dividing the source unit value in the base unit by the destination unit value in the same base unit.
About these units
pound foot/square second (lb·ft/s²): One poundal is one international avoirdupois pound foot per second squared, equal to 0.138254954376 newtons. It differs from pound-force and does not use standard gravity in its definition. One source unit equals 0.1382549544 newton.
poundal (pdl): One poundal is one international avoirdupois pound foot per second squared, equal to 0.138254954376 newtons. It differs from pound-force and does not use standard gravity in its definition. One destination unit equals 0.1382549544 newton.
Worked examples
- 1 pound foot/square second (lb·ft/s²) = approximately 1 poundal (pdl)
- 2.5 pound foot/square second (lb·ft/s²) = approximately 2.5 poundal (pdl)
- 10 pound foot/square second (lb·ft/s²) = approximately 10 poundal (pdl)
Precision and interpretation
Examples are rounded for display. Keep the unrounded factor for intermediate calculations and round the final answer to match the precision of the original measurement. Extra decimal places do not make a measured quantity more accurate.
Force and mass are different quantities. Check the distinction between pound-force and pound mass, and between metric, short, and long ton-force.
Common questions
How do I reverse this conversion?
Divide the target-unit value by the forward factor, or use the inverse converter. Multiplying by the same factor again is not the inverse operation.
Why can the displayed answer differ slightly?
Display rounding and numerical precision can produce a small difference from an exact fractional calculation. For technical work, retain sufficient precision and confirm the unit convention required by the source.
Related conversions
Force unit converters, Mass and weight converters, Everyday unit converters.
Similar tools
poundal (pdl) to pound foot/square second (lb·ft/s²): find the conversion factor, formula, worked examples, and precision guidance. Compare the inverse and related unit conversions.
Popular tools
Convert Bytes (B) to Nibbles (nibble). Check the formula, worked examples, unit definitions, precision, and related data tools.
Convert Bytes (B) to Pebibytes (PiB). Check the formula, worked examples, unit definitions, precision, and related data tools.
Use Base64 to Image to turn an encoded image representation into an image. Follow practical steps, review an example, and check the result before copying.
Use Bits (b) to Terabytes (TB) to convert data quantities. See the formula, worked examples, and unit definitions, with related converters for your next step.
Convert Kilobytes (KB) to Kilobits (Kb). Check the formula, worked examples, unit definitions, precision, and related data tools.
Convert Kibibits (Kib) to Tebibytes (TiB). Check the formula, worked examples, unit definitions, precision, and related data tools.